Quantum-composers 9500 Plus Series Manuel d'utilisateur télécharger pdf (Page 36)

- Within the Rate menu

Per: Set the period between pulses.

- Within the Gate/Trig menu

EXTin: Select Triggered mode.

Level: Set the trigger threshold level.

Edge: Select which edge, rising or falling, to trigger on.

Pressing the RUN/STOP key will arm the unit. Once the unit is armed, it will

generate a set of pulses for every external trigger received. The unit is reset at

the end of a burst and will generate another set of pulses upon receiving a new

trigger. Triggers that occur in the middle of a burst are ignored. Pressing the

RUN/STOP key will disarm the unit.

To Start a Continuous Stream of Pulses Using the External Trigger

The external trigger may be used to start the unit generating pulses:

- Within the Mode menu

Mode: Select the Continuous mode.

- Within the Rate menu

Per: Set the period between pulses.

- Within the Gate/Trig menu

EXTin: Select the Trigger mode.

Level: Set the trigger threshold level.

Edge: Select which edge, rising or falling, to trigger on.

Pressing the RUN/STOP key will arm the unit. Once the unit is armed, it will

begin generating pulses after an external trigger is received. Triggers that occur

after the pulses start are ignored. Pressing the RUN/STOP key a second time

will disarm the unit.

To use the External Gate to Control the System

The external trigger may be used to control the output of the unit. To gate the

system timer:

- Within the Mode menu

Mode: Select the desired mode.

- Within the Rate menu

Per: Set the period between pulses.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 69 70

Pas de commentaire

Quantum-composers 9500 Plus Series Manuel d'utilisateur Page 36