Quantum-composers 9530 Series Manuel d'utilisateur télécharger pdf (Page 56)

Page 56 9530/8530 Manual Version 4.8

Mode: Disabled

Change Trigger Mode

Mode: Triggered

Level: 2.50 Volts

Edge: Rising/Falling Edge

Mode: Dual Trig

Level: 2.50 Volts

Edge: Rising/Falling Edge

Gate Menu

When the Dual Trigger option is evoked under the Trigger menu the Gate menu changes to allow

the user to only change the level and edge parameters.

Mode: Dual Trig.

Level: 2.50 Volts

Edge: Rising/Falling Edge

13. Appendix F – Impedance

Matching

Outputs

TZ50 Impedance Matching Output Module

This module option allows a user to have a 50 Ω load on the output while maintaining output

amplitude of at least 4 Volts while in the TTL/CMOS mode. All other functionality of the module is

the same as the AT20 modules, including output while using the Adjustable Mode Function of the

channels.

TTL/ADJUSTABLE OUTPUTS

TTL/CMOS Mode

Output Level

4.0 Volts typical into 50 Ω

Rise Time

3 ns

Slew Rate

>0.5 V/ns

Jitter – Channel to Channel

<50 ps RMS

Adjustable Mode

Output Resolution

10 mV

Current

200 mA typical, 400 mA max (short pulses)

Slew Rate

>0.1 V/ns

*Note: The TZ50 module has significant overshoot and ringing through high

impedance (see figure).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 70 71

Pas de commentaire

Quantum-composers 9530 Series Manuel d'utilisateur Page 56