Quantum-composers 9250 Series Manuel d'utilisateur télécharger pdf (Page 23)

9250 Manual Version 1.2 | Quantum Composers

Recalling Custom Settings from a Bin

The 9250 series has the capability to recall any of the 6 custom user setups. If any of the

previously saved presets are to be recalled, click “Storage”, “Restore From Bin”, followed by

selecting the bin number to recall. Figure 6.8 represents the recalling process:

*Note: Selecting Default 0 will set the 9250 to factory default settings.

Figure 6.8 –9250 Application: Recalling From Bin

9250 Application Example

This example will demonstrate the proper 9250 application settings for a specific scenario.

The example will show how to output a single pulse on Channel-A upon receiving the rising

edge of every external trigger signal at 5V. The output will have an amplitude of 5V, pulse

width of 10ns, and 10ps delay present. Figure 6.9 on the following page demonstrates the

appropriate settings and corresponding values in which to be set.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 50 51

Pas de commentaire

Quantum-composers 9250 Series Manuel d'utilisateur Page 23